EZ DUPE BRPIOB2 Manual de usuario descargar pdf (Pagina 5)

7.4.2. Close Disc

Closes the target discs when all of the track(s) are burned on to all

target discs. Note: The copied disc(s) will NOT play back without

this step. Do NOT skip this step.

7.4.3 Disc Info

Displays the information regarding the track(s) on the disc(s) and

how much space is remaining on the target disc(s).

7.5 EJECT ALL DISC

Allows the duplicator to eject disc.

7.6 COPY COUNTER

Counts the number of successful and failed copies of CD, DVD,

Blu-ray made by the duplicator.

7.6.1 Show Counter

Show the number of successful and failed copies of CD, DVD, Blu-

ray

7.6.2 Enable Counter

Set Enable or Disable the Copy Counter.

7.6.3 Clear Counter

To reset the Copy Counter.

7.7 Update Bios

Allows for update or rollback of the duplicator firmware.

SETUP

8.1 Auto Start Time

Sets auto start time from OFF (no auto start) to 99 sec. Allows the

duplicator to automatically start one of six following functions once

the master disc and desired number of target disc(s) are inserted

and the drive trays are closed: Copy, Test, Copy & Verify, Copy &

Compare, Verify and Compare.

8.2 Display Mode

Sets the amount of information displayed on the LCD during the

performance

of various functions.

8.2.1 Basic

Basic Information Displays.

8.2.2 Show Timer

Enables or disables the copy time to be displayed when the copy

process is finished.

8.2.3 Show Speed

Displays the speed at which discs are read and writing during

various processes.

8.3 Button Beep

ON or OFF Beeping sound.

8.4 Eject on Start

Eject all trays after the booting sequence complete.

8.4.1 Eject All Discs

Eject all trays with disc inside.

8.4.2 Do Not Eject

Do not eject any disc.

8.4.3 Eject target Only

Eject writer drive only.

8.4.4 Eject Source Only

Eject reader drive only.

8.4.5 Eject All Trays

Eject all drives.

8.5 Reader Speed

Sets the speed at which discs are read during various processes.

8.6 Compare Speed

Sets the speed at which the compare process is executed.

8.7 Language

Allows different language selections for LCD display.

8.8 Clear Setup

Clears the CMOS and resets the duplicator back to factory

defaults.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comentarios a estos manuales

Sin comentarios

EZ DUPE BRPIOB2 Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Duplicadores de los medios de comunicación EZ DUPE BRPIOB2